| GENERAL |
| Type: | Citizen band / "Freeband" / Export transceiver |
| Frequency range: |
Export mode
24.715-30.105 MHz
10 m mode
28.000-29.695 MHz
10 NOAA weather channels or 140-170 MHz (RX only)
|
| Channels / tuning steps: | 480 (6*40 Hi and 6*40 Lo) |
| Mode: | AM / FM / SSB |
| Frequency control: | PLL |
| Frequency stability: | ±5 ppm @ -20 to +50°C (-4 to +122°F) |
| Clarifier or Delta tune: | ±? KHz "Fine tune" |
| Power supply: | 13.8 VDC (3-pin connector) |
| Current drain / power consumption: | RX: ? mA
TX: Max 8 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 200*61*287 mm (7.87*2.4*11.3") |
| Weight: | 1.5 Kg (3.31 lb) |
| Other features: |
PA. CTCSS/PL an DCS. Noise reduction. Weather alert. NB/ANL.
+10 KHz button. ±100 KHz repeater offset. Dimmer. SWR meter.
VOX. Echo chamber. Roger beep. Scanning. PC programmable.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
| Sensitivity: |
AM: 1 uV (10 dB S+N/N)
FM: 1 uV (20 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
|
| Selectivity: |
AM/FM
3 KHz (-6 dB)
9 KHz (-50 dB)
SSB
2.1 KHz (-6 dB)
3.3 KHz (-60 dB)
|
| Image rejection: | 65 dB |
| AF output power / speaker: | 3 W at ?% distortion / 8 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 1-12 W
FM: 1-40 W
SSB: 1-35 W
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±2.8 KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 4-pin (Male locking ring jack) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | China, 2023-202x |
| Main PCB: | |
| Sub PCBs: | |
| Additional info: | |
| Related documents: | User manual (775 KB) |
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
