RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Pearce-Simpson logo


Copyright logo


Last modified 2023-03-10

Valid HTML 4.01 Transitional

Pearce-Simpson Super Cheetah MkIII / Mk3 (By Hatadi Electronics)

A picture of Pearce-Simpson Super Cheetah  Mk3 / MkIII (By Hatadi Electronics)

SPECIFICATIONS

GENERAL
Type:Citizen band Export transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (C5121)
Frequency stability:±%
Clarifier or Delta tune:±? Hz
Power supply:13.8 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. ANL/NB. Channel 19 switch. SWR meter. Scanning.




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Korea, 198x-198x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:One of the last Pearce-Simpson CB radios from Hatadi
Related documents: PLL: C5121
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Pearce-Simpson Super Cheetah  Mk3 / MkIII (By Hatadi Electronics)