RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Midland logo


Copyright logo


Last modified 2024-02-10

Valid HTML 4.01 Transitional

Midland 79-892

A picture of Midland 79-892

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (PLL02A)
Frequency stability:?%
Clarifier or Delta tune:±? KHz (Located on the microphone)
Power supply:13.8 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):189*64*243 mm (7.44*2.52*9.57")
Weight:2.23 Kg (4.92 lb), without mounting bracket
Other features:PA. NB. Tone hi-cut.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:600 ohm / 6-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1977-197x (Discontinued)
Main PCB:PTBM048AOX by Cybernet Electronics Corporation
Sub PCBs:
Additional info: NB! The clarifier is located on the original microphone
Related documents: Schematic diagram (2.2 MB)
PLL: PLL02A
Sams Photofact #:CB-180 (April 1978)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Midland 79-892