RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Midland logo


Copyright logo


Last modified 2023-02-03

Valid HTML 4.01 Transitional

Midland 3001 (77-003) "Precision series"

A picture of Midland 3001 (77-003) ''Precision series''

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM
Frequency control:PLL (LC7130)
Frequency stability:Max ? ppm
Clarifier or Delta tune:No
Power supply:13.8 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. ANL. Hi-cut filter.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:0.7 uV (10 dB S+N/N)
Selectivity:
Image rejection:
AF output power / speaker:4 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -65 dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Korea, 1979-198x (Discontinued)
Main PCB:484201D by Maxon
Sub PCBs:
Additional info:
Related documents: Schematic (746 KB)
PLL: LC7130
Sams Photofact #:CB-286 (March 1980)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
An inside picture of Midland 3001 (77-003) Precision series
A rear picture of Midland 3001 (77-003) Precision series