RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Hy-Gain logo


Copyright logo


Last modified 2021-05-25

Valid HTML 4.01 Transitional

Hy-Gain 8 / VIII (3108)

A picture of Hy-Gain 8 / VIII (3108)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels/tuning steps:40
Mode:AM / SSB
Frequency control:PLL (PLL02A)
Frequency stability:Max ? ppm
Power supply:Mains: 105-120 VAC (2-pin connector)
or 13.8 VDC (3-pin connector)
Current drain/power consumption:RX: ? mA @ 13.8 VDC
TX: ? A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):400*120*289 mm (15.75*4.72*11.38")
Weight:? Kg (? lb)
Other features:PA. ANL/NB. Digital clock. SWR-meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:? dB
AF output power/speaker:? W at ?% distortion / ? ohm
External speaker connector:?, ? ohm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation:No FM
Spurious emissions:Less than -? dB
Microphone impedance/connector:? ohm / 5-pin DIN (180)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, (Assembled in Puerto Rico), 197x-197x (Discontinued)
Main PCB: PTBM059COX by Cybernet Electronics Corporation
Probably also PTBM048AOX depending on market
Sub PCBs: PTPW007COX - AVR/power supply board
PTZZ018COX - Clock/driver board? (Contains a Toshiba T3491A IC)
And others...
Additional info:
Related documents: PLL: PLL02A
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options/Accessories:
- -
A rear picture of Hy-Gain 8 / VIII (3108)
A picture of Hy-Gain 8 / VIII (3108) main PCB
A picture of Hy-Gain 8 / VIII (3108) rear label