| GENERAL |
| Type: | Citizen band transceiver |
| Frequency range: | 27.015-27.225 MHz (Old Australian bandplan) |
| Channels / tuning steps: | 18 |
| Mode: | AM |
| Frequency control: | PLL (REC86345) |
| Frequency stability: | ±?% |
| Clarifier or Delta tune: | No |
| Power supply: | 13.8 VDC (Fixed power cord) |
| Current drain / power consumption: | RX: ? mA
TX: ? A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | ? mm (?") |
| Weight: | ? Kg (? lb) |
| Other features: | PA. ANL. RF gain. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: ? MHz
|
| Sensitivity: | 0.25 uV (10 dB S/N) |
| Selectivity: | 10 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: | ~3.5 W (5 W input) |
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | 4 mV for 100% modulation |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Hong Kong, 19xx-19xx (Discontinued) |
| Main PCB: | |
| Sub PCBs: | |
| Additional info: |
Made for the australian market with an
australian-to-american conversion channel selector
|
| Related documents: | User manual (1 MB) |
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
