RigPix logo

Braun Funktechnische Geräte logo

Back to main

Back to Braun

Next base VHF/UHF

Copyright logo

Last modified 2023-11-01

Valid HTML 4.01 Transitional

Braun SE-401 dig

A picture of Braun SE-401 dig


Type:Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:Continuous
Frequency stability:Max 100 Hz per 30 minutes
Mode:FM / SSB / CW
Channels / memory management:None
Repeater shift / offset:-600 KHz
Power supply:Mains: 220 VAC (2-pin connector)
or 13.8 VDC (4-pin connector)
Current drain / power consumption:RX: Max 1.4 A @ 13.8 VDC
TX: Max 2.9 A @ 13.8 VDC
Antenna impedance / connector:50-75 ohm / SO-239 (M-jack)
Dimensions (W*H*D):305*120*270 mm (12*4.72*10.63")
Weight:7.3 Kg (16 lb)
Other features:1750 Hz tone call. Tone hi-cut filter.

Receiver system: Single conversion superheterodyne
IF: 10.7 MHz
Sensitivity: FM: 0.15 uV (10 dB S/N)
SSB/CW: 0.06 uV (10 dB S/N)
Selectivity: FM: 15 KHz (-6 dB)
SSB/CW: 2.4 KHz (-6 dB)
Image rejection:
AF output power / speaker:2 W at ?% distortion / ? ohm
External speaker connector:4-8 ohm

RF output power:
FM:10 W
SSB (PEP):10 W
CW:10 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -75 dB
Microphone impedance / connector:200-1000 ohm or Hi-Z / 5-pin DIN
Microphone input level:? mV

Manufactured:West Germany, 1976-197x (Discontinued)
Additional info: New price 1976 in West Germany: DM 2768.00
Related documents:User manual (18.5 MB)
Modifications and fixes:
Options / Accessories:
- -