RigPix logo

ATV/DXTV logo


Back to main

Back to ATV & DXTV

Next receiver


Copyright logo


Last modified 2024-07-18

Valid HTML 4.01 Transitional

MiniTiouner Express

A picture of MiniTiouner Express

SPECIFICATIONS

GENERAL
Type:VHF/UHF DATV (DVB-S and DVB-S2) receiver
Frequency range: 144-2420 MHz
Tuning steps:Depending on software
Frequency stability:±? ppm
Video codecs: H.262 (MPEG2)
H.264 (MPEG4)
H.265
Audio codecs: MPA (MPEG)
AAC (MPEG4)
AC3 (Dolby)
Power supply:8-24 VDC (Barrel connector, center positive)
Current drain / power consumption:Max 350 mA (Excluding external in-line devices)
Antenna impedance / connector:75 ohm / Two F-jacks
Dimensions (W*H*D):75*28*40 mm (2.95*1.1*1.58")
Weight:80 g (2.82 oz)
Other features:USB type B connector (USB2 or 3 required).




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity: 1288 MHz: -96 dBm (Cliff point @ FEC=7/8)
1288 MHz: -100 dBm (Cliff point @ FEC=1/2)
Selectivity:
Image rejection:
Symbol rate:Any between 35 KS to 10 MS
FEC: DVB-S: 1/2, 2/3, 3/4, 5/6, 6/7 or 7/8
DVB-S2: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 or 9/10




MISCELLANEOUS
Manufactured:USA, 2018-2021 (Discontinued)
Additional info: Serit NIM.
A Portsdown system or PC with suitable software is required.

Up until the summer of 2024, I could not find any info online
of anyone using the Express in a Portsdown system. So, I tried
it myself and can confirm that it works just as well as the
Minitiouner v2 in my own system.

New price 2019 from the US: $75.00
Related documents: Windows manual Draft 16 (3.4 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -

Typical MiniTiouner Express sensitivity plot
Typical sensitivity plot @ FEC 7/8