RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2022-11-28

Valid HTML 4.01 Transitional

Alinco DR-510T

A picture of Alinco DR-510T

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: USA
TX: 144-148 / 440-450 MHz
RX: 144-148 / 440-450 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 KHz
Frequency stability:? ppm
Mode:FM
Channels / memory management: 14 regular
1 call
1 odd repeater offset
1 scan edge pair (Program scan)
Priority function
RAM storage with lithium battery backup
Repeater shift / offset: VHF: 600 KHz
UHF: 1.6, 5 and 7.6 MHz
Power supply:13.8 VDC
Current drain / power consumption:RX: 500 mA (Squelched)
TX: Max 10 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):140*50*205 mm (5.51*1.97*8.07")
Weight:1.7 Kg (3.75 lb)
Other features:CTCSS/PL. DTMF encoder.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz (VHF) - 30.825 MHz (UHF)
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
24 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:45 W5 W
70 cm:35 W5 W
Modulation system:Variable reactance
Max FM deviation (Factory set):5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 199x-199x (Discontinued)
Additional info:
Related documents:User manual (117 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -