RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-435E MKIII

A picture of Alinco DR-435E MKIII

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: Europe
TX: 430-440 MHz
RX: 350-512 MHz

NB! The extended RX frequency range
may require modification
Tuning steps:5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±2.5 ppm (No temperature reference)
Mode:FM / NFM (10F3 DV option, EJ-47U)
Channels / memory management: 100 regular with alpha tags
1 call
1 scan edge pair (Program scan)
10 DTMF autodial
Non-volatile EEPROM storage
Repeater shift / offset:±0 to 99.995 MHz
Power supply:11.7-15.8 VDC
Current drain / power consumption:RX: 400-600 mA
TX: Max 12 A
Antenna impedance / connector:50 ohm / ?
Dimensions (W*H*D):142*40*174 mm (5.59*1.58*6.85")
Weight:1 Kg (2.2 lb)
Other features: CTCSS/PL and DCS. Theft alarm. 1K2 / 9K6 TNC option (EJ-41U).
GPS input for APRS.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 30.85 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity: FM:
12 KHz (-6 dB)
28 KHz (-60 dB)
NFM:
6 KHz (-6 dB)
14 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5




TRANSMITTER SECTION
RF output power:

HighMidLow
70 cm:35 W20 W5 W
Modulation system:Variable reactance
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2007-20xx
Additional info:
Related documents:User manual (1.2 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -