RigPix logo

ADI logo


Back to main

Back to ADI

Next mobile VHF/UHF


Copyright logo


Last modified 2022-10-09

Valid HTML 4.01 Transitional

ADI AM-580

A picture of ADI AM-580

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Standard
TX: 144-146 / 430-440 MHz
RX: 108-180 / 220-260 / 350-490 MHz
Export
TX: 136-174 / 400-480 MHz
RX: 108-180 / 220-260 / 350-490 MHz
Tuning steps:2.5 / 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:±2.5 ppm @ -20 to +60°C (-4 to +140°F)
Mode:TX: FM / NFM
RX: AM / FM / NFM
Channels / memory management: 758 regular with alpha tags (7 characters)
1 home
2 hyper
5 scan edge pairs
Non-volatile EEPROM storage
Repeater shift / offset:±0-100 MHz in selected step size
Power supply:13.8 VDC ±15% ("T" connector on pigtail)
Current drain / power consumption:RX: Less than 800 mA
TX: Max 10 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):140*40*212 mm (5.51*1.58*8.35")
Weight:1.12 Kg (2.47 lb)
Other features: CTCSS/PL and DCS. 2-tone, 5-tone. DTMF. Detachable front panel.
1000 / 1450 / 1750 / 2100 Hz tone call. PC programmable. Cloning.
ARS. Scrambler. Crossband repeater. Four color backlite selectable.
Backlit microphone DTMF keypad. Twin RX (VU / UV / VV / UU)




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity:FM: 0.25 uV (12 dB SINAD)
NFM: 0.35 uV (12 dB SINAD)
Selectivity:FM: 70 dB (Adjacent channel)
NFM: 60 dB (Adjacent channel)
Image rejection:
AF output power / speaker:2 W at 10% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow 3Low 2Low 1
2 m:50 W25 W10 W5 W
70 cm:40 W25 W10 W5 W
Modulation system:
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 8-pin (Modular)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, 2013-202x
Additional info:
Related documents:User manual (7.1 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -