Back to main

Back to Yaesu

Next mobile VHF/UHF





Last modified 2013-10-20

Yaesu FT-5100

A picture of Yaesu FT-5100

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range:TX: 144-146 / 430-440 MHz (Europe)
TX: 144-148 / 430-450 MHz (USA)
RX: 128-180 / 420-475 MHz (After modification)
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
Mode:FM
Memory channels:92 (46 on each band) including scan edge
2 call channels (1 on each band)
Power supply:13.8 VDC 15%
Current drain/power consumption:RX: Max 600 mA
TX: 3.5-11.5 A
Antenna impedance/connector:50 ohms / SO-239 on pigtail
Dimensions (W*H*D):140*40*155 mm
Weight:1.0 Kg (2.2 lb)
Other features:CTCSS/PL encoder, Dimmer, Twin RX (V+V/V+U/U+U)




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 17.7 MHz (VHF), 21.7 (UHF)
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB), 24 KHz (-60 dB)
Image rejection:65 dB
AF output power/speaker:3 W at 5% distortion / 8 ohms
External speaker connector:3.5 mm, 4-16 ohms




TRANSMITTER SECTION
RF output power:VHF Hi: 50 W, Lo: 5 W
UHF Hi: 35 W, Lo: 5 W
Modulation system:Variable reactance
Max FM deviation:5 KHz
Spurious emissions:Less than -60 dB
Microphone connector/impedance:8-pin / 600 ohms to 10 kohms




MISCELLANEOUS
Manufactured:Japan, 1993-199x (Discontinued)
Additional info:New price 1993 in Sweden: 8086:- SEK
Related documents:The FT-5100 is similar to FT-5200 but without the removable head
Modifications:
Options/Accessories:
AD-3
FP-700
FTS-22
MF-1A3B
MH-15D8
MH-26D8
MH-26E8
MH-26F8
MH-27A8J
MMB-37
MW-1
SB-10
SP-7
YH-1
VHF/UHF duplexer for separate antenna operation
Power supply for AC mains operation
Dual-band tone squelch unit
Boom microphone with flexible arm
Hand miocrophone with DTMF memory keypad
Hand microphone with 1750 Hz tone burst
Hand speaker-microphone with 1750 Hz tone burst
Hand microphone with DTMF keypad
Hand microphone with DTMF keypad
Quick-release mobile mounting bracket
Remote wireless controller/DTMF microphone
PTT switch unit for MF-1A3B or YH-1
External speaker
Headset