GENERAL |
Type: | Amateur UHF transceiver |
Frequency range dependng on version: | Version A: 1260-1300 MHz Version B: 1258-1300 MHz (Europe) |
Tuning steps: | 12.5 / 25 KHz |
Mode: | FM |
Channels/memory management: | 10 regular |
Repeater shift/offset: | ±? |
Power supply: | 13.8 VDC ±10% |
Current drain/power consumption: | RX: 500-660 mA TX: 2.5-5.5 A |
Antenna impedance/connector: | 50 ohms / N-jack |
Dimensions (W*H*D): | 160*50*175 mm (6.3*1.97*6.89") |
Weight: | 1.5 Kg (3.31 lbs) |
Other features: | 1750 Hz tone burst (version B only) |
|
|
|
|
RECEIVER SECTION |
Receiver system: | Double conversion superheterodyne 1st IF: 58.3 MHz 2nd IF: 455 KHz |
Sensitivity: | 0.25 uV (12 dB SINAD) |
Selectivity: | |
Image rejection: | |
AF output power/speaker: | 1.5 W at 5% distortion / 8 ohms |
External speaker connector: | 3.5 mm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
Hi: 10 W
Lo: 1 W (version B), 5 W (version A)
|
Modulation system: | Variable reactance |
FM deviation: | ±5 KHz |
Spurious emissions: | Less than -50 dB |
Microphone impedance/connector: | ? ohms / 8-pin |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 198x-198x (Discontinued) |
Additional info: | |
Related documents: | User manual (23.7 MB) |
Modifications: | |
Reviews: | |
Options/Accessories: |
FTS-12
MF-1A3B
MH-10E8
MH-10F8
MH-14A8
MH-15C8
MH-15D8
SB-10
SP-55
YH-1
|
Tone squelch unit
Boom microphone with flexible arm
Standard hand microphone
Speaker-Microphone
Speaker-microphone with tone burst
Hand microphone with DTMF pad
Hand microphone with DTMF autodialler memory
PTT switch unit for MF1A3B or YH-1
External speaker
Headset
|
|