| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
Europe
TX: 144-146 MHz
RX: 144-146 MHz
USA
TX: 144-148 MHz
RX: 144-148 MHz
|
| Tuning steps: | 12.5 / 25 KHz (Europe)
5 / 10 KHz (USA) |
| Frequency stability: | ±? ppm |
| Mode: | FM |
| Channels / memory management: |
10 regular
Priority function
RAM storage with lithium battery backup
|
| Repeater shift / offset: | ±600 KHz |
| Power supply: | 13.8 VDC (2-pin metal locking ring connector) |
| Current drain / power consumption: | RX: 300 mA
TX: Max 5 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 150*50*174 mm (5.91*1.97*6.85") |
| Weight: | 1.3 Kg (2.87 lb) |
| Other features: | 1750 Hz tone call (Europe), 1800 Hz (USA). |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.25 uV (12 dB SINAD) |
| Selectivity: | 15 KHz (-6 dB)
30 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 1 W at ?% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
NB! The low level setting is not available on the US version.
|
| Modulation system: | Variable reactance |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 500-600 ohm / 7-pin (Metal locking ring connector) |
| Microphone input level: |
15 mV @ 1 KHz for ±4.5 KHz deviation
1.5 mV @ 1 KHz for ±3.5 KHz deviation
|
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1983-198x (Discontinued) |
| Additional info: | |
| Related documents: | User manual (7 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
FP-12
FTS-32
FTS-32E
YM-49
|
AC power supply. 13.8 VDC, 12 A
CTCSS/PL encoder/decoder (USA only)
CTCSS/PL encoder (USA only)
Speaker-microphone
|
|
