| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
Europe
TX: 144-146 MHz
RX: 144-146 MHz
USA
TX: 144-148 MHz
RX: 144-148 MHz
|
| Tuning steps: | Channelized |
| Frequency stability: | ±? ppm |
| Mode: | FM |
| Channels / memory management: |
6 regular (3 pre-installed from factory, according to market)
XTAL controlled
|
| Repeater shift / offset: | According to XTALs |
| Power supply: | 9.6 VDC ±10% (7 alkaline or 8 NiCd batteries) |
| Current drain / power consumption: | RX: 30-200 mA
TX: 500 mA |
| Antenna impedance / connector: | 50 ohm / BNC |
| Dimensions (W*H*D): | 69*171*49 mm (2.72*6.73*1.93") |
| Weight: | 400 g (14.11 oz), without batteries |
| Other features: | 1750 Hz repeater tone (Europe), 1800 Hz (USA). |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.32 uV (20 dB quieting) |
| Selectivity: | 40 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 500 mW at 10% distortion / ? ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
1 W
|
| Modulation system: | Vector phase modulation |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 2 Kohm / 6-pin |
| Microphone input level: | 15 mV @ 1 KHz for ±4.7 KHz deviation |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1978-1979 (Discontinued) |
| Additional info: | New/List price, january 1980 in the US: $199.00 |
| Related documents: | User manual (3.1 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
NC-1
PA-1
YM-24
|
NiCd charger
Voltage converter. 12 to 9 VDC
Speaker-microphone
|
|
