Back to main

Back to Yaesu

Next HF and more





Last modified 2014-10-19

Yaesu FT-1000MP Mark V

A picture of Yaesu FT-1000MP Mark V

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range:TX: 10-160 m + WARC
RX: 0.1-30 MHz
Tuning steps:0.625/1.25/2.5/5/10 Hz (for SSB/CW/RTTY)
100 Hz (for AM/FM)
Mode:AM/FM/SSB/CW/RTTY/Packet
Channels/memory management:99 regular
9 PMS
5 QMB
Lithium battery backup (CR2032)
Repeater shift/offset:0-200 KHz
Power supply:13.8 and 30 VDC from separate PSU
Current drain/power consumption:RX: 2.3-2.7 A
TX: Max 2.2 A @ 13.8 V and 14.5 A @ 30 V
Antenna impedance/connector:50 ohms (16.5-150 ohms with tuner) / 2*SO-239
Dimensions (W*H*D):410*135*347 mm (16*5.3*13.7")
Weight:14 Kg (31 lbs)
Other features:VOX, RS-232C (CAT), Twin RX. DSP
CTCSS/PL, Built-in auto ATU




RECEIVER SECTION
Receiver system:Triple conversion superheterodyne (FM)
Quadruple conversion superheterodyne (AM/SSB/CW)
Sensitivity: AM (10 dB S/N, 6 KHz BW)
0.5-1.8 MHz: 13 uV
1.8-30 MHz: 2 uV
FM (12 dB SINAD)
1.8-30 MHz: 0.5 uV
SSB/CW (10 dB S/N, 2.0 KHz BW)
0.5-1.8 MHz: 2 uV
1.8-30 MHz: 0.16 uV
Selectivity:
ModeSettingMin -6 dB BWMax -60 dB BW
All except FM2.0 KHz   1.8 KHz3.6 KHz
All except FM2.4 KHz2.2 KHz4.2 KHz
CW/RTTY/Packet   250 Hz250 Hz700 Hz
CW/RTTY/Packet500 Hz500 Hz1.8 KHz
AM Wide - 4 KHz14 KHz
FM - 8 KHz19 KHz
Image rejection:Main RX: 80 dB
Sub RX: 50 dB
AF output power/speaker:2 W at <10% distortion / 4 ohms
External speaker connector:3.5 mm, 4-8 ohms




TRANSMITTER SECTION
RF output power:FM/SSB/CW: 200 W
AM: 50 W
Modulation system:AM: Low-level, early stage
FM: Variable reactance
SSB: Balanced modulation
AFSK: Audio frequency shift keying
Max FM deviation:2.5 KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:500-600 ohms / 8-pin




MISCELLANEOUS
Manufactured:2000-2005 (Discontinued)
Additional info:
Related documents:User manual (4.3 MB)
Modifications:
Options/Accessories:
- -
A rear picture of Yaesu FT-1000MP Mark V