RigPix logo

Tokyo Hy-Power logo


Back to main

Back to Tokyo Hy-Power

Next HF and more


Copyright logo


Last modified 2023-11-03

Valid HTML 4.01 Transitional

Tokyo Hy-Power HT-115

A picture of Tokyo Hy-Power HT-115

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 21-21.5 MHz
RX: 21-21.5 MHz
Tuning steps:100 Hz (Dynamic rate per turn depending on dial speed)
Frequency stability:Within ±150 Hz the first 60 minutes after power on
Within 100 Hz per 30 minutes thereafter
Mode:SSB / CW
Channels / memory management: None
Repeater shift / offset:No
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: Max 700 mA
TX: Max 5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*60*250 mm (7.09*2.36*9.84")
Weight:2.6 Kg (5.73 lb)
Other features:




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 9 MHz
Sensitivity:0.4 uV (10 dB S+N/N)
Selectivity: SSB/CW
2.2 KHz (-6 dB)
6 KHz (-60 dB)
CW (With narrow filter option)
500 Hz (-6 dB)
1.6 KHz (-60 dB)
Image rejection:
AF output power / speaker:1 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

Pwr
SSB (PEP):20 W
CW:20 W
Modulation system:Balanced
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1987-19xx (Discontinued)
Additional info:
Related documents:User manual (1.6 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
HC-100
HL-100B
HNB-100
HP-100S
?
?
Antenna tuner
Linear amplifier. 100 W
Noise blanker unit
Power supply with built-in speaker
Narrow CW filer
Mobile mounting bracket