RigPix logo

Standard logo


Back to main

Back to Standard

Next mobile VHF/UHF


Copyright logo


Last modified 2023-10-02

Valid HTML 4.01 Transitional

Standard FTM-10S

A picture of Standard FTM-10S

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: TX: 144-146 / 430-440 MHz (Asia)
RX: 0.5-1.8 / 76-108 / 108-222 / 300-1000 MHz
Tuning steps:5 / 6.25 / 8.22 / 9 / 10 / 12.5 / 15 / 20 / 25 /50 / 100 / 100 KHz
Frequency stability:±? ppm
Mode:TX: FM / NFM
RX: AM / FM / NFM / WFM Stereo
Channels / memory management: 500 regular with alpha tags
Repeater shift / offset:±?
Power supply:11.7-15.8 VDC
Current drain / power consumption:RX: 500 mA
TX: Max ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):112*38*178 mm (4.41*1.5*7.01")
Weight:1.3 Kg (2.87 lb)
Other features: Bluetooth. Clock/Calendar. WIRES-ready. Line in. PA.
CTCSS/PL & DCS. DTMF. 9K6 packet ready. Twin RX




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity: AM (10 dB S/N)
0.5-1.7 MHz: 5 uV
108-137 MHz: 0.8 uV
300-336 MHz: 0.8 uV
FM (12 dB SINAD)
137-150 MHz: 0.2 uV
150-174 MHz: 0.25 uV
336-420 MHz: 0.25 uV
420-470 MHz: 0.2 uV
800-900 MHz: 0.4 uV
900-1000 MHz: 0.8 uV
WFM (12 dB SINAD)
76-108 MHz: 2 uV
174-222 MHz: 1 uV
470-800 MHz: 5 uV
Selectivity:AM/FM: 12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

Pwr
2 m:10 W
70 cm:7 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:2007-20xx (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -