RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-15

Valid HTML 4.01 Transitional

Kenwood / Trio TR-9500

A picture of Kenwood TR-9500

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: TX: 430-440 MHz
RX: 430-440 MHz
Tuning steps:FM: 1 / 5 / 25 KHz
SSB: 100 Hz / 10 KHz
Frequency stability:±10 ppm @ -20 to +50°C (-4 to +122°F)
Mode:FM / SSB / CW
Channels / memory management: 6 regular (Memory 6 can also store split frequencies)
RAM storage, external voltage required for retention
Repeater shift / offset:-1.6 and -7.6 MHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 700 mA (No signal) + 2 mA for memory backup
TX: Max 3.8 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):170*68*241 mm (6.69*2.68*9.49")
Weight:2.7 Kg (5.94 lb)
Other features:NB. 1750 Hz repeater tone (Europe)




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.6 MHz
2nd IF: 455 KHz (FM), 8.83 MHz (SSB/CW)
Sensitivity: FM: 0.25 uV (12 dB SINAD)
SSB/CW: 0.5 uV (20 dB S/N)
Selectivity: FM
14 KHz (-6 dB)
20 KHz (-60 dB)
SSB/CW
2.4 KHz (-6 dB)
4.8 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

Pwr
FM:10 W
SSB (PEP):10 W
CW:10 W
Modulation system:FM: Variable reactance direct shift
SSB: Balanced
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500 ohm / 6-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1980-198x (Discontinued)
Additional info:
Related documents:User manual (3.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
BO-9
PS-20
SP-40
SP-120
System base
Power supply, 13.8 VDC, 4.5 A
Mobile speaker
External speaker