RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next HT/portable


Copyright logo


Last modified 2023-09-14

Valid HTML 4.01 Transitional

Kenwood / Trio TR-2200G

A picture of Kenwood / Trio TR-2200G

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:Channelized
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 12 regular (Two XTALs per channel)
Repeater shift / offset:According to XTALs
Power supply: 10.4-15.2 VDC (Ten R6/AA batteries)
or 10.4-15.2 VDC external (3-pin connector for Kenwood version)
Barrel connector (Center positive) for Trio version
Current drain / power consumption:RX: 55 mA
TX: Max 420 mA
Antenna impedance / connector:50 ohm / SO-239 and telescopic whip
Dimensions (W*H*D):135*58*191 mm (5.32*2.28*7.52")
Weight:1.8 Kg (3.97 lb), with batteries and microphone
Other features:1750 Hz tone call (Kenwood version only).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (20 dB S/N)
Selectivity:16 KHz (-6 dB)
32 KHz (-50 dB)
Image rejection:
AF output power / speaker:500 mW at 10% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:1 W
Modulation system:Variable reactance phase shift
Max FM deviation (Factory set):±5 KHz (Adjustable up to ±7.5 KHz)
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1973-197x (Discontinued)
Additional info:
Related documents:User manual (855 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -