RigPix logo

Kantronics logo


Back to main

Back to Kantronics

Next transceiver


Copyright logo


Last modified 2023-06-17

Valid HTML 4.01 Transitional

Kantronics KT-110

A picture of Kantronics KT-110

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 10 m
RX: 10 m
Tuning steps:100 Hz
Frequency stability:100 Hz per 30 minutes after 60 minutes warmup
Mode:SSB / CW
Channels / memory management: None
Repeater shift / offset:No
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: Max 700 mA
TX: Max 5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*60*250 mm (7.09*2.36*9.84")
Weight:2.6 Kg (5.73 lb)
Other features:




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 9 MHz
Sensitivity:SSB/CW: 0.4 uV (10 dB S+N/N)
Selectivity: SSB/CW
2.2 KHz (-6 dB)
6 KHz (-60 dB)
CW with optional narrow filter
500 Hz (-6 dB)
1.6 KHz (-60 dB)
Image rejection:
AF output power / speaker:1 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

Max Pwr
SSB (PEP):20 W
CW:20 W
Modulation system:SSB: Balanced
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1988-1990 (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -