RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2016-02-13

Icom IC-901E

A picture of Icom IC-901E

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range:144-146 / 430-440 MHz + optional band units
Tuning steps:? KHz
Mode:FM + optional SSB/CW unit for 2 m
Channels/memory management:12 regular per band
1 call per band
Repeater shift/offset:
Power supply:11-16 VDC
Current drain/power consumption:RX: 0.85-1.4 A
TX: Max 12 A
Antenna impedance/connector:50 ohms / 1*SO-239 + 1*N-jack
Dimensions (W*H*D):150*50*191 mm (5.9*2*7.5"), when not separated
Weight:1.6 Kg (3.5 lbs), when not separated
Other features:Twin RX




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 17.2 MHz (VHF), 30.875 MHz (UHF) - No options installed
2nd IF: 455 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power/speaker:2.4 W at 10% distortion / 8 ohms
External speaker connector:3.5 mm, 8 ohms




TRANSMITTER SECTION
RF output power:
2 mHi: 50 W, Lo: 5 W
70 cmHi: 35 W, Lo: 5 W
Modulation system:Variable reactance frequency modulation
Max FM deviation:5 KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:600 ohms / ?-pin




MISCELLANEOUS
Manufactured:Japan, 1989-1990 (Discontinued)
Additional info:New price 1990 in sweden: 8400:- SEK
Related documents:User manual (6.8 MB)
Modifications:
Options/Accessories:
EX-766
EX-767
HS-15
HS-15SB
MB-21
MB-31
MB-32
OPC-189
UT-40
UT-48
UX-19E
UX-59A
UX-129E
UX-R91E
UX-S92E
Optical fiber cable interface unit
Power cable connector box
Flexible microphone
PTT switchbox
Remote controller bracket
Band unit stacking bracket
Mounting bracket
Optical fiber cable extension, 20 m
Tone squelch unit
DTMF encoder/decoder unit
10 m band unit, 10 W
6 m band unit, 10 W
23 cm band unit, 10 W
MW/76-950 MHz RX unit
2 m SSB/CW unit, 25 W