RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2017-12-05

Icom IC-3200A

A picture of Icom IC-3200A

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range:140-150 / 440-450 MHz (USA, Asia and Australia)
Tuning steps:5 / 15 / 25 KHz
Mode:FM
Channels/memory management:10 regular
2 call
Repeater shift/offset: Any in-band at minimum 5 KHz steps
Power supply:13.8 VDC 15%
Current drain/power consumption:RX: 500-650 mA
TX: 3.5-7.5 A
Antenna impedance/connector:50 ohms / SO-239 (on pigtail)
Dimensions (W*H*D):140*50*207 mm (5.51*1.97*8.15")
Weight:1.9 Kg (4.19 lbs)
Other features:CTCSS/PL encoder




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 30.875 MHz
2nd IF: 455 KHz
Sensitivity:0.2 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power/speaker:1.7 W at 10% distortion / 8 ohms
External speaker connector:3.5 mm, 4-8 ohms




TRANSMITTER SECTION
RF output power:
2 mHi: 25 W, Lo: 5 W
70 cmHi: 25 W, Lo: 5 W
Modulation system:Variable reactance
FM deviation:5 KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:600 ohms / 8-pin




MISCELLANEOUS
Manufactured:Japan, 1985-198x (Discontinued)
Additional info:Supplied with DTMF microphone (HM-14) as standard
Related documents: User manual (3.5 MB)
Service manual (3.7 MB)
Modifications:
Options/Accessories:
HM-12
HM-14
HM-15
HS-15
HS-15SB
OPC-102
PS-45
SM-8
SP-10
UT-23
Hand microphone with up/down buttons
Hand microphone with up/down buttons and DTMF pad
Hand microphone with up/down buttons and 1750 Hz tone burst button
Flexible mobile microphone
PTT switch box
DC power cable. Max 10 A (for connecting to PS-45)
AC power supply. 13.8 VDC, 8 A
Electret desk microphone
External speaker
Voice synthesizer unit