RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-225

A picture of Icom IC-225

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:25 / 100 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management:None
Repeater shift / offset:-600 KHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 400 mA
TX: Max 2.4 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):156*58*247 mm (6.14*2.28*9.72")
Weight:2.4 Kg (5.29 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.4 uV (20 dB S/N)
Selectivity:16 KHz (-6 dB)
30 KHz (-50 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:10 W
Modulation system:Variable reactance phase modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 3-pin (Metal locking ring connector)
Microphone input level:~6 mV




MISCELLANEOUS
Manufactured:Japan, 1975-197x (Discontinued)
Additional info:Very early PLL transceiver
Related documents: User manual 2.5 MB)
Schematic diagram (4 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -