RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2021-03-03

Valid HTML 4.01 Transitional

Icom IC-207H

A picture of Icom IC-207H

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: TX: 144-146 / 430-440 MHz (Europe)
TX: 144-148 / 440-450 MHz (USA)
TX: 144-148 / 430-440 MHz (Asia)
RX: 118-174 / 400-479 MHz (Modification may be required)
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability:? ppm
Mode:TX: FM
RX: AM/FM
Channels/memory management: 150 regular
5 scan edge pairs
2 call
5 scratch pad
Priority watch
Non-volatile EEPROM storage
Repeater shift/offset:?
Power supply:13.8 VDC 15%
Current drain/power consumption:RX: 0.8-1 A
TX: 4.5 to 12 A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):140*40*185 mm (5.51*1.58*7.28")
Weight:1.17 Kg (2.58 lb)
Other features: CTCSS/PL with tone scan. DTMF. 1750 Hz call tone.
Dimmer. 1K2/9K6 packet jack. Demo display.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 46.05 MHz
2nd IF: 450 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:Better than 60 dB
AF output power/speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighMid hiMid loLow
2 m:50 W20 W10 W5 W
70 cm:35 W20 W10 W5 W
Modulation system:Variable reactance frequency modulation
FM deviation:5 KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:600 ohm / 8-pin (Modular)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, 1996-200x (Discontinued)
Additional info:
Related documents:User manual (1.2 MB)
Modifications and fixes:
Reviews:
Options/Accessories:
CP-13L
CS-207
EX-1513
EX-1759
HM-90
MB-17A
MB-58
MB-65
OPC-288L
OPC-347
OPC-440
OPC-441
OPC-600
OPC-601
OPC-646
OPC-647
PS-30
SP-7
SP-10
SP-12
Cigarette lighter cable with noise filter
Cloning software
Infrared sub receiver
Infrared receiver
Wireless IR microphone
Mobile mounting bracket
Remote controller bracket
Remote controller bracket
DC power cable, for charging HM-90 NiCd battery
DC power cable, 20A. 7 m (23 ft)
Mic extension cable. 5 m (16.4 ft)
Speaker extension cable. 5 m (16.4 ft)
Separation cable. 3.5 m (11.5 ft)
Separation cable. 7 m (23 ft)
Cloning cable
Mic extension cable. 2.5 m (8.2 ft)
DC power supply. 13.8 VDC
External speaker, base design
External speaker, compact design
External speaker, slim type