RigPix logo

Elecraft logo


Back to main

Back to Elecraft

Next HF and more


Copyright logo


Last modified 2023-02-26

Valid HTML 4.01 Transitional

Elecraft K2 / 100

A picture of Elecraft K2 / 100

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 10-80 m (160 m option)
RX: 10-80 m (160 m option)
Tuning steps:10 Hz
Frequency stability:±? ppm
Mode:CW (SSB option)
Channels / memory management:
Repeater shift / offset:No
Power supply:10-15 VDC
Current drain / power consumption:RX: 150 mA (Battery save mode)
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):198*74*208 mm (7.8*2.9*8.2")
Weight:1.5 Kg (3.3 lb), without options
Other features: Built-in keyer with 9 memories. Full QSK. DSP option.
KPA-100 amplifier unit included as standard.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
1st IF: ? MHz
Sensitivity:0.15 uV (No reference, preamp on)
Selectivity:
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:Max 100 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dBc
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:1999-20xx (Discontinued)
Additional info:New price, december 1998 in the US: $579.00 (Without options)
Related documents: User manual Rev.I (5.3 MB)
Manual errata Rev.I-8 (219 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
K-160M
KAF-2
KAT-2
KBT-2
KIO-2
KNB-2
KRC-2
KSB-2
MH-4
Proset-K2
160 m unit and 2nd RX port
Audio filter and realtime clock
Internal antenna tuner
Battery
RS-232C interface and AUX I/O
Noise blanker
Band decoder
SSB unit
Standard hand microphone
Boom headset