| GENERAL |
| Type: | Amateur HF transceiver |
| Frequency range: |
TX: 14.0-14.35 MHz (20 m) and 7.0-7.3 MHz (40 m)
RX: 5-8.5 / 12-16.5 MHz
|
| Tuning steps: | 10 / 100 Hz, 1 / 5 KHz |
| Frequency stability: | Less than 50 Hz per hour after 5 minute warmup @ 25°C (77°F) |
| Mode: | TX: CW
RX: SSB / CW |
| Channels / memory management: |
None
|
| Repeater shift / offset: | No |
| Power supply: | 7-14 VDC |
| Current drain / power consumption: | RX: 32-45 mA
TX: 300-700 mA |
| Antenna impedance / connector: | 50 ohm / BNC |
| Dimensions (W*H*D): | 135*30*80 mm (5.32*1.18*3.15") |
| Weight: | 250 g (8.82 oz), without options |
| Other features: |
DDS. Built-in QSK keyer. 30 m option (RX: 8-12.5 MHz).
Built-in ATU and paddle options.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 4.915 MHz
|
| Sensitivity: | 0.2 uV (10 dB S+N/N) |
| Selectivity: | |
| Image rejection: | |
| AF output power / speaker: | 500 mW at ?% distortion / No internal speaker |
| External speaker connector: | 3.5 mm, 8-32 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
1-4 W (Depending on voltage)
|
| Modulation system: | - |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -40 dB |
| Microphone impedance / connector: | - |
| Microphone input level: | - |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 2003-20xx (Discontinued) |
| Additional info: | |
| Related documents: | User manual (2.8 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
KBX30
KXAT1
KXPD1
|
30 m band unit
Internal auto ATU
Plug-in keyer paddle
|
|
