RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2020-07-10

Valid HTML 4.01 Transitional

Stabo XM3001E

A picture of Stabo XM3001E

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver, multinorm
Frequency range: d: 26.565-27.405 MHz
EU: 26.965-27.405 MHz
E: 26.965-27.405 MHz
PL: 26.960-27.410 MHz
RU: 26.515-27.855 MHz (Modification required)
Channels/tuning steps: D: 80
E / EU / PL: 40
RU: 120
Mode:AM
Frequency control:PLL
Frequency stability:Max ? ppm
Power supply:13.2 VDC
Current drain/power consumption:RX: 500 mA (Nominal)
TX: Max 1.5 A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):116*36*168 mm (4.57*1.42*6.61")
Weight:800 g (1.76 lb)
Other features:ANL. ASC. Channel 19 switch. Hi-cut.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:0.7 uV (20 dB SINAD)
Selectivity:10 KHz (-60 dB)
Image rejection:60 dB
AF output power/speaker:5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power: D: 1 W
EU: 1 W
E: 4 W
PL: 4 W
RU: 4 W
Modulation system:
Max FM deviation:No FM
Spurious emissions:Less than -? dB
Microphone impedance/connector:? ohm / 6-pin (Metal screw ring connector)
Microphone input sensitivity:10 mV




MISCELLANEOUS
Manufactured:199x-20xx (Discontinued)
Additional info:
Related documents:
Modifications:
Reviews:
Options/Accessories:
- -