RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Galaxy logo


Copyright logo


Last modified 2025-09-29

Valid HTML 4.01 Transitional

Galaxy DX-2517

A picture of Galaxy DX-2517

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range: Export mode
25.615-29.205 MHz
10 m mode
28.765-29.205 MHz
Channels / tuning steps:240 (6*40)
Mode:AM / FM / SSB / CW
Frequency control:PLL: MC145106 (Early) - RCI-145106 (Later)
Frequency stability:0.003% @ -30 to +55°C (-22 to +131°F)
Clarifier or Delta tune:Coarse (RX/TX): ±5 KHz
Fine (RX): ±1.5 KHz
Power supply:Mains: 120 VAC
Current drain / power consumption:RX: ? W
TX: ? W
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity: AM: 0.5 uV (10 dB S/N)
FM: 0.25 uV (20 dB S/N)
SSB: 0.3 uV (10 dB S/N)
Squelch sensitivity:
Selectivity:60 dB (Adjacent channel)
Image rejection:50 dB
AF output power / speaker:2.5 W at 10% distortion / ? ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power: AM/FM/CW: 10 W
SSB: 25 W
Modulation system:
FM deviation (Factory set):±? KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, xxxx-200x (Discontinued)
Main PCB: Early
EPT690010Z by Ranger
Single sided with through-hole components
Later
EPT690010C by Ranger
Single sided with through-hole components
MOSFET version (From serial #T61000973)
EPT690010D by Ranger
Single sided with through-hole components
Sub PCBs:
Additional info:
Related documents: User manual (282 KB)
PLL: MC145106
RF driver: 2SC2166
RF finals: Two 2SC2312

MOSFET version
RF driver: IRF520
RF finals: Two IRF520
Known markets and approvals: Export
No known approvals for CB use
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -