RigPix logo

Bando Radio logo


Back to main

Back to Bando Radio

Next transceiver


Copyright logo


Last modified 2023-01-08

Valid HTML 4.01 Transitional

Bando Technic-3DP

A picture of Bando Technic-3DP

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 15 to 40 m in three bands
40 m:   7.0-7.1 MHz
20 m:   14.5-14.35 MHz
15 m:   21.0-21.45 MHz
Tuning steps:Continuous
Frequency stability: Within 300 Hz for the first 30 minutes after 1 minute warmup
Within 100 Hz per 30 minutes thereafter
Mode:SSB / CW
Channels / memory management: None
Repeater shift / offset:No
Power supply:Mains: 110 / 220 VAC
Current drain / power consumption:RX: 30 W
TX: Max 280 W
Antenna impedance / connector:50-75 ohm / SO-239
Dimensions (W*H*D):335*138*350 mm (13.19*5.43*13.78")
Weight:13.5 Kg (29.76 lb)
Other features:VOX. NB. Attenuator.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
Sensitivity:0.25 uV (10 dB S/N)
Selectivity: SSB:
2.4 KHz (-6 dB)
4.4 KHz (-60 dB)
Image rejection:>50 dB
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8-16 ohm




TRANSMITTER SECTION
RF output power:
SSB:100 W
CW:100 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Korea, 198x-19xx (Discontinued)
Additional info:
Related documents: User manual (1.9 MB, in Korean)
RF driver: 12BY7-A
RF finals: Two 6146A, 6146B or 6146W
Modifications and fixes:
Reviews:
Options / Accessories:
- -