RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HF and more


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-M03SX

A picture of Alinco DR-M03SX

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 28.0-29.7 MHz
RX: 28.0-29.7 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 100 regular
1 call
Repeater shift / offset:±0 to 15.995 MHz
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: Less than 600 mA (Squelched)
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):140*40*115 mm (5.51*1.58*4.53")
Weight:680 g (1.5 lb)
Other features:CTCSS/PL option.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
10 m:10 W1 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / ?-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1998-200x (Discontinued)
Additional info:
Related documents:Service manual (1.4 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -