RigPix logo

Alinco logo


Back to main

Back to Alinco

Next mobile VHF/UHF


Copyright logo


Last modified 2024-03-27

Valid HTML 4.01 Transitional

Alinco DR-620D

A picture of Alinco DR-620E

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 / 430-440 MHz
RX: 76-108 / 108-174 / 335-480 / 800-990 MHz
Tuning steps:5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 KHz
Frequency stability:±2.5 ppm (-10 to +60°C (
Mode:TX: FM / NFM
RX: AM / FM / NFM / WFM
Channels / memory management: 80 VHF only
80 UHF only
40 common
2 call (One for each band)
2 scan edge pairs (One for each band)
Alpha tags
Non-volatile EEPROM storage
Repeater shift / offset:±?
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 400-600 mA
TX: Max 8 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):140*40*185 mm (5.51*1.58*7.28")
Weight:1 Kg (2.2 lb)
Other features: CTCSS/PL and DCS. Detachable control head. Theft alarm. Twin RX.
1K2 / 9K6 bd packet/GPS (EJ-50U) and 10F3 digital voice board (EJ-47U) options.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.7 MHz (VHF) - 45.1 MHz (UHF)
2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
Sensitivity: Main band: 0.2 uV or better (-12 dB SINAD)
Sub band: 0.25 uV or better (-12 dB SINAD)
Selectivity: FM: 12 KHz (-6 dB), 28 KHz (-60 dB)
NFM: 6 KHz (-6 dB), 14 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighMidLow
2 m:20 W10 W2 W
70 cm:20 W10 W2 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2002-2014 (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
EDS-9 Front panel separation kit