RigPix logo

Icom logo


Back to main

Back to Icom

Next receiver


Copyright logo


Last modified 2024-06-02

Valid HTML 4.01 Transitional

Icom IC-R71

A picture of Icom IC-R71

SPECIFICATIONS

GENERAL
Type:HF receiver
Frequency range:0.1-30 MHz
Tuning steps:10 / 50 Hz, 1 KHz
Frequency stability:±? ppm
Mode:AM / SSB / CW / RTTY (FM option)
Channels / memory management: 32 regular
1 scan edge pair
Power supply:Mains (3-pin IEC C14 connector)
or 12-14 VDC option
Current drain / power consumption:Max 30 VA @ mains
Antenna impedance / connector: Ant 1: Hi-Z / Spring terminal (0.1-1.6 MHz only)
Ant 2: 50 ohm / SO-239
Dimensions (W*H*D):286*111*276 mm (11.25*4.37*10.87")
Weight:7.5 Kg (16.53 lb)
Other features: PBT and notch filter. NB. Dimmer. Tone control. Attenuator.
Continuous bandwidth control at 4th IF. CI-IV computer control.




RECEIVER SECTION
Receiver system: Triple conversion superheterodyne (FM option)
1st IF: 70.4515 MHz
2nd IF: 9.0115 MHz
3rd IF: 455 KHz
Quadruple conversion superheterodyne (AM/SSB/CW/RTTY)
1st IF: 70.4515 MHz
2nd IF: 9.0115 MHz
3rd IF: 455 KHz
4th IF: 9.0115 MHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 4-8 ohm




MISCELLANEOUS
Manufactured:Japan, 198x-198x (Discontinued)
Additional info: Battery-backed BIOS-RAM. Special procedure to replace the
battery, or the radio will die!
Related documents: RAM board battery replacement procedure (69 KB)
Modifications:
Reviews:
Options / Accessories:
- -